JJM Boiler Works NBT-23Condensate acidity neutralizer

JJM Boiler Works NBT-23 pH treatment tank

Both hot water heaters and HVAC systems can be configured so that cold water lines run past flue gases; this preheats the water inside to provide additional energy economy. As the hot gases encounter the cold pipes, those gases condense and the resulting drip is highly acidic. 

The NBT-23 pH Treatment Tank from JJM Boiler Works  uses replaceable porous pouches of magnesium hydroxide pellets to neutralize those acids by 1-3 pH). The effect is much more complete and much more reliable than the more common approach of limestone chips in a pit.

JJM Boiler Works NBT-23 side viewKEY SPECS:
Its inlet is 7/8” from its base; its outlet is 3” from its base. Condensate has to rise through more than 2 inches of pellets before it can be discharged in this gravity-only flow system. The tank can handle flows up to 2.4 gallons per hour; its dimensions are (HWD, inches) are 11-3/4 x 4-3/4 x 4-7/8. Inlet and outlet connections are 7/8-inch PVC




Newstips Swoosh TM 210

Editorial Project House

© Copyright 2016, 2017 and 2018 Newstips, Lord Martin Winston and J2J Corporation; all rights reserved

Lot 14, Riding Ridge Court
Builder Don Cerra


Front elevation

This site needs a larger screen and is not optimized for phone or tablet viewing